TL052A

Name: TL052A
Brand: Texas Instruments
Rating: 4.5 (10 reviews)
Author: Lisleapex

Op amp featuring JFET input design, capable of accepting input signals up to V+

6,457 有效庫存

TL052A

有效庫存6,457

Op amp featuring JFET input design, capable of accepting input signals up to V+

製造商零件號 # : TL052A
包裝/封裝: SOP8
製造商: Texas Instruments
產品分類 : Instrumentation, OP Amps, Buffer Amps

品質保證

從我們的供應鍊網路採購的所有零件都經過嚴格的進貨檢驗流程。這種細緻的檢查可確保客戶收到的零件是正品並符合要求的標準。此外，我們還保存這些檢查的詳細記錄，以確保整個供應鏈的透明度和可追溯性。

認證

我們已成功獲得各項認證標準，並建立了自己的專業檢測實驗室。這確保了我們向客戶提供的每件產品都符合最高的品質標準。我們遵守嚴格的測試協議，以保持我們產品的一致性和準確性。為了確保我們的產品是原裝正品，我們還與信譽良好的第三方檢測機構合作進行嚴格的品質測試。我們對品質的承諾延伸到滿足行業、法律、監管和 ISO 9001:2015 的要求。

運輸與付款

關於運送

我們通常會在幾個工作日內通過可靠的運輸公司（例如 FedEx、SF、UPS 或 DHL）運送訂單。我們還支持其他運輸方式。如果您想詢問具體的運輸細節或費用，請隨時與我們聯繫。

關於付款

我們接受多種支付方式，包括VISA、MasterCard、銀聯、西聯、PayPal等渠道。

如果您有特定的付款方式或想詢問費率和其他詳細信息，請隨時與我們聯繫。

電匯

Paypal

信用卡

西聯匯款

速匯金

服務與包裝

About After Sales Service

All Parts Extended Quality Guarantee

自發貨之日起 90 天內發起申請。

與我們的工作人員確認退貨或換貨。

保持貨物收到時的原始狀態。

最後請注意，退貨或換貨的資格取決於對退貨商品實際狀況的評估。在完成退貨或換貨流程之前，我們將評估收到的貨物。如果您對退貨或換貨有任何疑問或需要進一步幫助，請隨時通過以下方式聯絡我們： [email protected]

關於包裝

在包裝方面，我們的產品均精心包裝在防靜電袋中，以提供ESD防靜電保護。外包裝堅固耐用且閉合牢固。我們支持各種包裝方法，例如捲帶式、切帶式、管式或託盤式。

例子

捲帶式

剪膠帶

管或託盤

TL052A 數據表

目前的價格方案正在編制中。請聯絡我們的客戶服務團隊獲取最新的價格資訊。感謝您的理解和支援!

感興趣的部分

OPA124UA
Texas Instruments
Min$3.494

價格詳情
OPA4234UA
Texas Instruments
Min$0.975

價格詳情
TAS5162DKD
Texas Instruments
Min$6.801

價格詳情
TAS5707PHPR
Texas Instruments
Min$1.240

價格詳情
TAS5717PHPR
Texas Instruments
Min$4.061

價格詳情
TPA2028D1YZFR
Texas Instruments
Min$0.436

價格詳情
TLV4316IPWR
Texas Instruments
Min$0.457

價格詳情
TL064CPWR
Texas Instruments
Min$0.171

價格詳情

快速報價

請提交詢價 TL052A 或發送電子郵件給我們： Email: [email protected], 我們將在 12 小時內與您聯繫。

數量^*

聯絡人^*

郵箱^*

公司名稱

還要別的嗎？

TL052A 詳細說明

The TL05x series of JFET-input operational amplifiers offers improved dc and ac characteristics over the TL07x and TL08x families of BiFET operational amplifiers. On-chip Zener trimming of offset voltage yields precision grades as low as 1.5 mV (TL051A) for greater accuracy in dc-coupled applications. Texas Instruments improved BiFET process and optimized designs also yield improved bandwidth and slew rate without increased power consumption. The TL05x devices are pin-compatible with the TL07x and TL08x and can be used to upgrade existing circuits or for optimal performance in new designs.

BiFET operational amplifiers offer the inherently higher input impedance of the JFET-input transistors, without sacrificing the output drive associated with bipolar amplifiers. This makes them better suited for interfacing with high-impedance sensors or very low-level ac signals. They also feature inherently better ac response than bipolar or CMOS devices having comparable power consumption.

The TL05x family was designed to offer higher precision and better ac response than the TL08x, with the low noise floor of the TL07x. Designers requiring significantly faster ac response or ensured lower noise should consider the Excalibur TLE208x and TLE207x families of BiFET operational amplifiers.

Because BiFET operational amplifiers are designed for use with dual power supplies, care must be taken to observe common-mode input voltage limits and output swing when operating from a single supply. DC biasing of the input signal is required, and loads should be terminated to a virtual-ground node at mid-supply. Texas Instruments TLE2426 integrated virtual ground generator is useful when operating BiFET amplifiers from single supplies.

The TL05x are fully specified at ±15 V and ±5 V. For operation in low-voltage and/or single-supply systems, Texas Instruments LinCMOS families of operational amplifiers (TLC-prefix) are recommended. When moving from BiFET to CMOS amplifiers, particular attention should be paid to the slew rate and bandwidth requirements, and also the output loading.